Add an SSL certificate

To add an SSL certificate to your project, you’ll need to be a System Administrator or a member of a SSL Certificate Administrators group.

1. Navigate to the SSL certificates listing screen by pressing Settings in the sidebar and selecting SSL certificates from the menu.
2. Select New certificate from the toolbar. The Add a certificate window will open.
3. A certificate is usually issued as a single or collection of PEM files, or as individual .key, .crt files. In practice, each certificate is listed in a file, using seperate blocks.

4. Copy each section in the file including in ——BEGIN xxxxxx——— and ———END XXXXX——— tags into the the Add a certificate window.
5. Once completed, press Verify certificate.
6. If verification is successful you can press Install certificate. A confirmation message will be displayed and your new certificate will be displayed in the listing.
7. You'll need to enable the certificate once installed.

To make the certificate active you'll need to enable it from the actions menu.

1. Locate the certificate in the list.
2. Open the actions menu for the certificate by pressing on the triple dot button.
3. Select Enable certificate from the menu. A confirmation message will be displayed of the change of status.

To disable a certificate you'll need to use the actions menu in the listing.

1. Locate the certificate in the list.
2. Open the actions menu for the certificate by pressing on the triple dot button.
3. Select Disable certificate from the menu. A confirmation message will be displayed of the change of status.